界面对聚丙烯/碳酸钙复合材料光氧老化的影响

以聚丙烯(PP)/碳酸钙为研究对象,以复合材料界面为着眼点,探讨了不同的填料粒径和表面组成对复合材料光氧老化的影响,并提出了相关机理.首先,文中认为聚合物/无机填料界面面积与界面化学组成是影响老化速率的关键因素.聚合物与碳酸钙的总界面面积的增大会加速PP的光氧老化,不同偶联剂处理会改变碳酸钙的表面化学特性进而对PP老化产生促进或抑制.在此基础上提出了基于界面的老化反应速率概念及相应模型.其次,在老化领域采用了"界面放大"的实验方案,验证了碳酸钙对PP的老化促进很大程度上来源于碳酸钙表面的化学组成.此外,研究发现采用表面处理剂钛酸酯改性的碳酸钙能大大促进PP的老化,且表现为钛酸酯与碳酸钙的协同效果.     

Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

铝合金表面电偶腐蚀与电子功函数的关系

铝合金中经常会引入一些第二相来改善其性能,第二相由于和铝基体的电位差不同,将会对铝合金的局部腐蚀产生重大的影响.为了揭示铝合金腐蚀的物理本质,本文利用基于密度泛函理论第一性原理的计算方法,详细计算了铝合金中一些主要第二相(Al_2Cu、Al_3Ti和Al_7Cu_2Fe)的多种晶面的电子功函数,分析了电子从各个晶面逸出的难易,求得了第二相与Al基体的本征电势差,我们发现不同的晶面暴露在合金最外层,会显著地影响本征电势差;即便是同一晶面,暴露在最外层的原子种类和构型不同,对腐蚀的影响也不一样.从电子的层面解释了电偶腐蚀发生的原因.     

多糖凝胶的孔径和化学结构对单壁碳纳米管流动性和选择性分离的影响

基于凝胶柱色谱分离技术研究了单分散的单壁碳纳米管(SWCNTs)在不同化学结构多孔多糖凝胶中的流动特性以及对金属型(m-)/半导体型(s-)SWCNTs分离的影响.通过比较SWCNTs在一系列不同孔径的葡聚糖Sephacryl凝胶中的流动行为,发现减小孔径尺寸能够增强s-SWCNTs与凝胶之间的吸附作用力,使大直径的m-SWCNTs快速地流过凝胶颗粒,而选择性地保留了小直径的s-SWCNTs.进一步发现多糖凝胶化学结构比孔径尺寸在SWCNTs的m/s分离中起着更重要的作用.当基于葡聚糖结构的Sephacryl凝胶中的氨基结构被琼脂糖结构所取代时,如Superdex 200和Sepharose 2B凝胶会增强它们与SWCNTs之间的作用力,使SWCNTs的保留时间延长,降低了s-SWCNTs的选择性和纯度.此外,即使拥有与Sephacryl S100类似的孔径范围,当Sephacryl凝胶中的氨基被疏水环氧丙烷基团取代时,葡聚糖凝胶Sephadex G100与SWCNTs的作用力很弱,导致所有SWCNTs快速流动,无法实现SWCNTs的m/s分离.因而,我们认为凝胶孔径和化学结构共同影响并调控了SWCNTs的m/s分离的选择性、纯度以及分离效率.     

Palladium‐Catalyzed Decarboxylative Cycloaddition of Vinylethylene Carbonates with Formaldehyde: Enantioselective Construction of Tertiary Vinylglycols

An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd₂(dba)₃]?CHCl₃ and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities.     

A Bioorthogonal Small‐Molecule‐Switch System for Controlling Protein Function in Live Cells

Chemically induced dimerization (CID) has proven to be a powerful tool for modulating protein interactions. However, the traditional dimerizer rapamycin has limitations in certain in vivo applications because of its slow reversibility and its affinity for endogenous proteins. Described herein is a bioorthogonal system for rapidly reversible CID. A novel dimerizer with synthetic ligand of FKBP′ (SLF′) linked to trimethoprim (TMP). The SLF′ moiety binds to the F36V mutant of FK506‐binding protein (FKBP) and the TMP moiety binds to E. coli dihydrofolate reductase (eDHFR). SLF′‐TMP‐induced heterodimerization of FKBP(F36V) and eDHFR with a dissociation constant of 0.12 μM . Addition of TMP alone was sufficient to rapidly disrupt this heterodimerization. Two examples are presented to demonstrate that this system is an invaluable tool, which can be widely used to rapidly and reversibly control protein function in vivo.     

Gold(I)‐Catalyzed Diazo Coupling: Strategy towards Alkene Formation and Tandem Benzannulation

A gold(I)‐catalyzed cross‐coupling of diazo compounds to afford tetrasubstituted alkenes has been developed by taking advantage of a trivial electronic difference between two diazo substrates. A N‐heterocyclic‐carbene‐derived gold complex is the most effective catalyst for this transformation. Based on this new strategy, a gold(I)‐initiated benzannulation has been achieved through a tandem reaction involving a diazo cross‐coupling, 6π electrocyclization, and oxidative aromatization.     

Ultrasound/microwave‐assisted extraction and comparative analysis of bioactive/toxic indole alkaloids in different medicinal parts of Gelsemium elegans Benth by ultra‐high performance liquid chromatography with MS/MS

Indole alkaloids are the main bioactive/toxic components in Gelsemium elegans Benth. To determine the distribution and contents of indole alkaloids in its different medicinal parts, a novel and rapid method using ultra‐high performance LC (UPLC) with MS/MS has been established and validated with an optimized ultrasound/microwave‐assisted extraction method. Four constituents, namely, humantenidine, humantenmine, gelsemine, and koumine, were simultaneously determined in 6 min. Chromatographic separation was achieved on an ultra‐high performance LC BEH C₁₈ column with a gradient mobile phase consisting of methanol and water (containing 0.1% formic acid both in methanol and water) at a flow rate of 0.3 mL/min. The detection was performed on a triple quadrupole electrospray MS/MS by positive ion multiple‐reaction monitoring mode. All the analytes showed good linearity (r ≥ 0.9934) within a concentration range from 0.1–25 μg/mL with a LOQ of 25–50 ng/mL. The overall intra‐ and intervariations of four components were <4.7% with an accuracy of 97.3–101.3%. The analysis results showed that there were remarkable differences in the distribution and contents of four chemical markers in the roots, stems, and leaves of G. elegans Benth. The findings can provide necessary and meaningful information for the rational utilization of its resources.     

水玻璃砂中碳酸盐含量的测定

将水玻璃砂样品(10~20g)置于测定装置的反应瓶中,并在吸收瓶中预先加入氢氧化钡标准溶液25.00mL,加水至吸收液的总体积为60mL,检查测定装置的气密性。向反应瓶中加入过量硫酸(1+9)溶液使样品中的碳酸盐反应定量释放出二氧化碳气体。反应时间约为0.5min。释出的二氧化碳导入吸收瓶中,与氢氧化钡反应生成碳酸钡沉淀。多余的氢氧化钡用盐酸标准溶液滴定,据此计算样品中碳酸盐的含量。为使吸收充分完全,采用内部强制循环吸收的方法并规定吸收时间至少15min,如样品中碳酸钠含量较高时,可延长吸收时间至20min或30min。试验时,加入标准碳酸钠量为0.104 7g,3次测定的平均值为0.106 5g,相对平均偏差为1.8%。     

极谱法测定矿石及冶金渣中铍含量

矿石及冶金渣试样与过氧化钠在700℃熔融,用温水浸取,以一定量盐酸酸化后定容。分取部分试样溶液使其中铍(Ⅱ)与铍试剂Ⅲ在EDTA、氯化铵和氨水底液中,生成稳定的配合物,该配合物于-0.80V(vs.SCE)处产生一灵敏的吸附波,其峰电流的二阶导数与铍(Ⅱ)的质量浓度在0.004~0.20mg·L-1范围内呈线性关系,检出限(3S/N)为0.3μg·L-1。方法用于了7个矿石及冶金渣样品的分析,所得测定值与认定值一致。方法的加标回收率在96.0%~105%之间,相对标准偏差(n=6)在1.3%~9.7%之间。